Faster than the built-in adapter, connects at gigabit rate though iperf tests show about – Mbit speed. When the link is lost but the adapter ist still connected to USB , the driver tells transmit errors to the protocol trying to send. Works out of the box driver present since kernel 2. To take care of connections built up at system start I have implemented the following procedure: Cable Matters USB 3.

Uploader: Bale
Date Added: 15 July 2014
File Size: 61.35 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 75048
Price: Free* [*Free Regsitration Required]

While it is advertised as USB 2.

The version I used was “Linux kernel 3. Sabrent Sabrent USB 2. I simply don’t know what to use them for. USB register states that it draws max.

References v t e. After setting the paths, compiling and linking should work. Reboot and you should have a fully working Ethernet adapter. The hardest part was in fact getting the Linux source code required, because the repositores contained the source for the wrong kernel version. So you might have to execute some network configuration tools after boot, e.


To build the driver, you need: Works out of the box driver present since kernel 2.

USB mb Ethernet Adapter Rj45 LAN Network Card Chipset for Moschip Mcs | eBay

Cause USB may not be the preferred way to build up a network server I decided not to implement more than one multicast address. The only disadvantage is the delay during boot with a USB connected adapter without an ethernet cable connected. SMP is now tested and known working fine.

If there’s an adapter connected, the driver initializes the adapter and waits some time for getting a physical network link.

MosChip MCS7830 Free Driver Download (Official)

You may try BC or something else – as long it’s unique within your network. SMB test show approx mpbs. Adapter needs last raspbian kernel.

Also, I am an absolute beginner in mcs78830 technology. If you get a model without the Logilink logo and the model number JP it’s a fake. Privacy policy About eLinux.

Works out of the box. Views Read View source View history. To avoid this, disconnect the USB-side if you don’t need the adapter. The device identifies as Vendor 0x and Product 0x in the device descriptor.


Link ok You don’t mcs780 to do anything else than maybe configure your network.

USB, 10/100Base-TX, RJ-45, Ethernet Adapter

It is not a project to the public but a result of my needs and my curiosity. This is demo version there is. Works with a Model “A” Pi if plugged into an external maybe unpowered hub.

After link is back, it can take up to 10 Sec. This page was last edited on 6 Julyat Following ones are the download links for manual installation: This software is distributed as compressed package. With older kernels adapter working about 10 minutes without problem, xl after that kernel write error message to dmesg and no packet is received.

Pi is powered by a 2.